15 allied components interna tional 714-665-1 140 www.a lli edcom pon en ts .com rohs 12/07/11 schematics dimensions:inch( mm) unless otherwise specified, all tolerances are 0.010(0.25) 0. 79 9(20.3) 0. 382 (9.7) 0.2 68 (6. 80 )max 0. 020 (0. 50) 0. 100 (2. 54) 0.3 00 (7. 62) 0.1 18 (3. 00) 0.7 00( 17. 78) allied da tec ode AHTA-1601S 5 7 6 14 16 15 2 1 10 11 3 1ct:1ct 1c t:1ct 12 rd+ rd- ct td+ td- rx+ ct ct rx- tx+ tx- ct all specifications subject to change without notice. mechanical 10/100 base t single port transformer AHTA-1601S polarity: 1-7, 16-10, in-phase ll: 0.5h max @ 100khz, 0.2v dcr: 0.9 operating temp: 0oc to 70oc max electrical speci?cations @ 25c part number ocl(uh min) @ 100khz, 200mv turns ratio chip: cable (5%) insertion loss (db max) return loss (db min) with 8ma dc bias 0.3-100mhz 0.3-30mhz 40mhz AHTA-1601S 350 1ct:1ct(tx)/1ct:1ct(rx) -1.1 -18 -16 60-80mhz -12 50mhz -14.5 part number AHTA-1601S electrical speci?cations @ 25c cross talk (db min) hi-pot (vrms) -35 1500 0.3-30mhz -40 80-100mhz -30 common mode rejection (db min) 60-100mhz -35 0.3-30mhz -42 60mhz isolation ?
|